ACSS-Aluminum Conductor Steel Supported

Voltage：Low

Conductor：Aluminum Conductor Steel Supported

Insulation：Non

Cores：Multi-Core

Standard：ASTM,DIN,BS etc

Packaging：Iron Or Wooden Drum

info@hlcables.com

+86-371-6886-6662

Online message

_{Applications:}

_{1. ACSS is recommended for use for overhead distribution and transmission lines and high temperature lines mainly when reconductoring is done over an existing line construction. In this case same tensions and loads are applied over the line but higher currents can be transferred.}

_{2. The advantages make ACSS especially useful in reconductoring applications requiring increased current with existing tensions and clearances, new line applications where structures can be economized because of reduced conductor sag}

_{Construction:}

_{ACSS is composed out of annealed 1350-0 aluminum wires, surrounding a galvanized steel core or aluminum clad steel core.}

_{Conductor Properties:}

_{ACSS can operate in high temperatures up to 250deg C, it has high conductivity therefore, it sags less and has self damping properties if pre stretched along installation. ACSS has low tensile strength and it''s aluminum wires are considered as they contribute almost nothing to the conductor tensile strength.}

_Standards:

_{ACSS conductor meets or exceeds the following ASTM specifications:}

_{.B341 Aluminum-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced.}

_{.B500 Metallic Coated Stranded Steel Core For Aluminum Conductors, Steel Reinforced.}

_{.B609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes.}

_{.B802 Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors,Steel Reinforced.}

_{.B803 High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-AlloyConductors, Steel Reinforced.}

_{.B856 Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS).}

_{The strandings available are identical to those listed in ASTM specification B232.}

_{.other international standards.}

ACSS Conductor Parameter:

Code Word	Size	Stranding	Diameter				Weight			Rated Strength
	（kcmil）	（Al/St）	(mm)				kg/km			(kN)
			Al Wire	Steel Wire	Steel Core	Complete Conductor	Al	Steel	Total	Standard Strength	High Strength
Partridge/ACSS	266.8	26/7	2.57	2	6	16.31	374	172	546	39.5	43.28
Junco/ACSS	266.8	30/7	2.4	2.4	7.19	16.76	375	246	621	52.04	57.83
Ostrich/ACSS	300	26/7	2.73	2.12	6.37	17.27	421	193	614	44.48	48.49
Linnet/ACSS	336.4	26/7	2.89	2.25	6.74	18.29	471	217	688	49.82	54.71
Oriole/ACSS	336.4	30/7	2.69	2.69	8.07	18.82	473	311	783	65.83	72.51
Brant/ACSS	397.5	24/7	3.27	2.18	6.54	19.61	557	204	761	48.93	53.82
Ibis/ACSS	397.5	26/7	3.14	2.44	7.33	19.89	557	256	813	57.83	63.16
Lark/ACSS	397.5	30/7	2.92	2.92	8.77	20.47	558	367	925	77.84	85.85
Flicker/ACSS	477	24/7	3.58	2.39	7.16	21.49	669	245	913	57.83	63.16
Hawk/ACSS	477	26/7	3.44	2.67	8.03	21.79	669	307	976	69.39	76.06
Hen/ACSS	477	30/7	3.2	3.2	9.61	22.43	670	440	1110	93.41	100.97

Name:	*
Tel:	*
Email:	*
Message:	*

Product Center

ABC cables

Power cables

Bare Conductor

Cables&wire

ACSS-Aluminum Conductor Steel Supported

Product Center

News & Events

Contact Us

Inquiry